1. المسح الميداني
يشير هذا إلى تركيب بعض شاشات عرض LED الخارجية ، والتي يجب اختبارها مقابل بيئة معينة ، وتضاريس ، ونطاق إشعاع مضيء ، وقبول السطوع ، ومعلمات أخرى. من أجل ضمان التثبيت السلس للوحة الإعلانات ، يجب أن يقوم موظفو القيادة بتنفيذ خطة رفع موحدة لضمان إمكانية استخدام المعدات بشكل طبيعي وثابت.
عرض الصمام
2. LED equipment construction
When building some outdoor led billboards, it is necessary to distinguish between wall advertising screens, hanging advertising screens and rooftop advertising screens. In actual installation, the crane and hoist should be used for lifting in sections according to the distance and height, and at the same time, ensure that the above personnel cooperate with each other. There is a better installation and use process for the led advertising screens for high-altitude operations.
Three, luminous radiation range debugging
Next, we need to conduct specific radiation range detection. Due to the different radiation ranges, the viewing angle of the LED display will be different. The outdoor LED display must be fixed and installed according to the field acceptance and everyone's usual viewing angle to ensure that each angle is far away. From a distance, you can see normal and balanced images and subtitles information. Four. Follow-up inspection and maintenance. Follow-up inspection includes many areas, such as LED display waterproof, heat dissipation layer, LED indicator waterproof coating, and rain cover on the display. , Cooling air on both sides, power supply lines, etc., these basic parts and components constitute the entire stable graphic LED display. After technical maintenance, it is necessary to carry out unified management and maintenance for these parts. When it is rusty, unstable, or damaged, it needs to be replaced in time to ensure the safe use of the entire display.
بشكل عام ، تعتمد اللوحات الإعلانية LED الخارجية - تقنية عالية لتبديد حرارة اللوحة الخلفية ومصدر ضوء مصفوفة نقطية لإدارة موحدة ، مما يفضي بشكل أكبر إلى استخدام شاشات العرض. توضح الخطوات الأساسية لتركيب شاشة الإعلانات الخارجية هذه أيضًا تثبيت شاشات العرض LED مرة أخرى. سيتيح لنا إتقان هذه الروابط المهمة استخدام شاشة عرض الإعلانات بشكل أكثر سلاسة وسرعة ، وإفساح المجال لخصائصها الممتازة في نشر المعلومات.
Wall mount
1. This device method is mainly used indoors and semi-outdoors.
2. Generally used for entrances of passages and corridors, as well as entrances of stations, railway stations, and subways.
3, used to guide the traffic of roads, railways and highways.
4. Screen body planning generally chooses integrated cabinet planning, or hoisting structure planning.
Mosaic installation
1. The entire LED display is embedded in the wall, and the display plane is on the same level as the wall.
2. Simple cabinet planning is generally used.
3. Pre-selection protection (frontal protection planning).
4. The device method is used indoors and outdoors, but the screen is usually used with a small distance and a small area.
5. Generally used for building entrances, halls, etc.
Column type installation
There are many ways to install a column, and it is generally used as a billboard in the field:
1. Single column device method: suitable for small screen applications.
2. Double-column device method: suitable for large-screen applications.
3. Closed protection channel: suitable for simple boxes.
4. Open protection channel: suitable for standard cabinets.
hanging installation
1. The device is generally used indoors or semi-field.
2. The screen display area is small, and generally does not leave the repair channel space. The entire screen is dismantled for maintenance, perhaps into a foldable integrated structure.
3. The screen area is slightly larger. Generally, pre-protection planning (that is, frontal protection planning, assembly method) is adopted.
Roof installation
1. The display screen and steel frame structure of this device method can resist wind is the key.
2, generally adopt oblique point of view device, or choose oblique 8 degree planning for module.
3. Mainly used for outdoor advertising.
