With the technological progress of LED display and the expansion of application fields, there are more subdivided LED displays according to different application fields, such as advertising screens, stage rental screens, door head screens, indoor small spacing, traffic guidance screens, etc. Outdoors, there is a kind of LED display that presents a unique scene - LED grille screen.
What is LED grille screen?
The LED grille display screen has the product form of strip, hollow and light transmission, also known as curtain screen, curtain wall screen, Xinhui color grille screen, etc. Due to its light weight, small wind load and flexible installation, it has More flexible application methods, usually used for building exterior walls and stage LED rental displays, etc., are a new generation of outdoor LED display products, especially suitable for the construction of super-large outdoor displays.
Product features:
Light weight, small wind load, suitable for large display screen.
Compared with the traditional LED display, the weight is 60 percent -80 percent lighter, which greatly reduces the strength and weight of the basic structure of the display. Strong wind resistance, effectively reducing the strength and weight of the basic structure of the LED display.
Simple structure, convenient installation and maintenance.
Using a small number of components, it can be easily attached to the wall without damaging the wall and foundation. Pre-maintenance or post-maintenance can be easily implemented as needed. If the front maintenance method is adopted, there is no need to set up a maintenance channel.
3. It has a good automatic cooling system, no need to increase the cooling of the air conditioner.
Each LED light bar is made of aluminum alloy material, with good light transmittance around it, which can achieve good self-heat dissipation. At the same time, the power supply, control, etc. are isolated from the luminescent material, and there is no need to configure a special cooling system, such as an LED screen.
Highly integrated light bar structure, high product stability.
Through the unique electronic circuit design, the number of light bars to be connected is reduced, and each 16 shares a set of power and signal connectors. Under the same conditions, the bad connection rate can be reduced by 94 percent .
Integrated design of control box and installation structure.
The control box is both part and part of the screen. The screen structure is greatly simplified, and no plugs and wires can be seen on the appearance of the screen. Not only beautiful, but also greatly improve the stability of the screen. High brightness, high refresh, high grayscale, can be played during the day.
Led grille screen contact information.png
Led grille screen case.jpg
With the technological advancement of LED display screens and the expansion of application areas, LED displays have been further subdivided into different application areas, such as advertising screens, stage rental screens, door head screens, indoor small spacing, traffic guidance screens, etc. Outdoors , there is a kind of LED display that presents a unique scene-LED grid screen.
What is the LED grid screen?
The LED grille display screen has a strip, hollow, and transparent product form, also known as curtain screens, curtain wall screens, and Xinhuicai grille screens. Due to its light weight, small wind load, and flexible installation, it has A more flexible application approach, usually used for building exterior walls and stage LED rental display screens, etc., is a new generation of outdoor LED display products, especially suitable for the construction of super large outdoor display screens.
Features:
1. Light weight, small wind load, suitable for large display screens.
The weight is 60 percent -80 percent lighter than the traditional LED display, which greatly reduces the strength and weight of the basic structure of the display. It is especially suitable for the construction of super large-scale LED display. The air permeability is 40 percent -50 percent , and it has strong wind resistance. , Effectively reduce the wind load, and further reduce the strength and weight of the basic structure of the LED display.
2. Simple structure, convenient installation and easy maintenance.
It can be easily attached to the wall with a small amount of components, and has no damage to the wall and foundation. According to the needs, it is convenient to realize the pre-maintenance or post-maintenance. If the front maintenance method is adopted, there is no need to establish a maintenance channel.
3. Good self-heating system, no need to install air conditioner for heat dissipation.
Each LED light bar is made of aluminum alloy material, which is transparent around, so it can achieve good self-heating. At the same time, the power supply, control, etc. are isolated from the luminescent material, and there is no need to build a heat dissipation system like traditional LED screens.
4. Highly integrated light bar structure, high product stability.
Adopting unique electronic circuit design to reduce the number of light strips, each 16 light strips share a set of power and signal connectors. Under the same conditions, the probability of poor connection is reduced by 94 percent .
5. Integrated design of control box and installation structure.
The control box is not only a part of the screen, but also a part of the structure. The structure of the screen body is greatly simplified, and no plugs and connections can be seen outside the screen. It is not only beautiful, but also greatly improves the stability of the screen. 6. High brightness, high refresh, high gray, and can be played during the day.
